水性聚氨酯环氧地坪漆和水性环氧地坪漆在使用上大致相同,只是水性聚氨酯无锡环氧地坪漆能在室外使用,而水性环氧地坪漆多用在室内,并且水性聚氨酯地坪漆具有防晒的特点。两者都能防尘、防滑、耐磨损、抗重压、整体无缝、易清理、耐腐蚀等特点。施工工艺上也有相同之处,聚氨酯地坪和水性环氧地坪施工工艺相同,但材料却有所不同。
Waterborne polyurethane floor paint and waterborne epoxy floor paint are similar in use, but waterborne polyurethane floor paint can be used outdoors, while waterborne epoxy floor paint is mostly used indoors, and waterborne polyurethane floor paint has sunscreen characteristics. Both can be dust-proof, skid-proof, wear-resistant, pressure-resistant, seamless, easy to clean, corrosion-resistant and other characteristics. There are also similarities in construction technology, polyurethane flooring and water-based epoxy flooring have the same construction technology, but the materials are different.
1、基础地面打磨清理,裂缝、凹坑、起皮、起砂等现象处理;
1. Ground grinding and cleaning, cracks, pits, peeling, sand and other phenomena;
2、涂刷底涂,涂量要足;
2. The amount of undercoat should be adequate.
3、刮涂无溶剂中涂砂浆;先找补再整体刮涂一道;待完全固化后精细打磨一道;
3. Scraping and painting with mortar in solvent-free medium; first looking for repairs and then scraping together as a whole; after complete solidification, fine grinding together;
4、刮涂腻子,用于封尘;
4. Scrape and coat putty for dust sealing.
5、刮涂一道聚氨酯面漆,再滚涂一道水性聚氨酯面漆即可。聚氨酯地坪可以在水性环氧地坪上做,反之水性无锡环氧地坪不能在聚氨酯上做。
5. Scrape a polyurethane topcoat and roll a waterborne polyurethane topcoat. Polyurethane flooring can be made on waterborne epoxy flooring, whereas waterborne epoxy flooring can not be made on polyurethane flooring.
水性聚氨酯耐磨性能十分好,具有耐潮湿及防滑、耐严苛化学品腐蚀、耐重载及强冲击、环保无污染等优点,使用寿命长达20年以上,耐-40℃-130℃高低温,可广泛应用于食品、屠宰、重防腐、高湿高温等极端工作环境下之地面处理,和所有须耐磨、洁净、耐化学品等车间、仓库、停车库、试验室等地面,具有传统地坪涂料如环氧、金刚砂地坪等不可比拟的优势。
Waterborne polyurethane has excellent wear resistance, such as moisture resistance, skid resistance, corrosion resistance of severe chemicals, heavy load resistance, strong impact resistance, environmental protection and pollution-free. Its service life is over 20 years, and it can withstand high and low temperatures ranging from - 40 C to 130 C. It can be widely used in extreme working environments such as food, slaughtering, heavy corrosion protection, high humidity and high temperature. Processing, and all workshops, warehouses, parking garages, laboratories and other floors that must be abrasive-resistant, clean, chemical-resistant, has incomparable advantages of traditional floor coatings such as epoxy, diamond sand floors.