您好,欢迎进入无锡龙升地坪科技有限公司官网!

无锡龙升地坪科技有限公司

专业成就品牌

提供设计环氧地坪施工

13656181588
无锡龙升地坪科技有限公司
常见问题
您的位置: 首页 > 新闻资讯 > 常见问题
哪些因素造成环氧地坪漆表面黯淡无光?
发布时间:2019-03-15浏览次数:0

环氧地坪漆因为其优秀的装饰效果,色彩多样,表面光滑平整、光泽亮丽(哑光面除外),特别是环氧自流平地坪表面能达镜面效果,一直深受人们的喜爱。但是有些消费者发现无锡环氧地坪漆施工后表面光泽度不够、黯淡无光,严重影响环氧地坪漆的表面视觉效果。这是什么原因呢?又该如何预防呢?

Because of its excellent decorative effect, various colors, smooth surface, bright gloss (except matte surface), especially the mirror effect of the self-leveling epoxy floor paint, has been deeply loved by people. However, some consumers find that the surface gloss of epoxy floor paint is not enough and dull after construction, which seriously affects the surface visual effect of epoxy floor paint. What is the reason for this? And how to prevent it?

 环氧地坪漆表面暗淡无光的原因:

Reasons for dull surface of epoxy floor paint:

1、因为贪图便宜,选择了环氧地坪漆价格相对较低却质量有问题的材料,导致施工后的环氧地坪达不到预期的效果。

1. Because of the greed for cheapness, epoxy flooring paint has been chosen for materials with relatively low price but poor quality, resulting in the construction of epoxy flooring can not achieve the desired results.

2、环氧地坪漆材料使用时没有按照厂家的要求加入了过量的稀释剂,或者选择的稀释剂不配套,沸点低,挥发过快。

2. When using epoxy floor paint material, there is no excessive diluent added according to the requirements of the manufacturer, or the selected diluent is not matched, boiling point is low and volatilization is too fast.

3、在上一道涂层未完全干透就进行面漆的施工,导致环氧环氧地坪漆黯淡无光。

3. The application of topcoat before the last coat is completely dried leads to a dull epoxy floor paint.

4、基层地面没有使用环氧地坪研磨机打磨平整,地面粗糙,导致环氧地坪漆施工后也不平整,光线折射导致涂膜表面光泽度不够。

4. The base floor is not polished flat by using floor grinder, and the ground is rough, which results in the unevenness of epoxy floor paint after construction. The light refraction results in the insufficient gloss of the coating surface.

5、环氧地坪漆施工时环境温度过高,过高的温度会导致地坪漆起皱,影响表面的光泽度。

5. When epoxy floor paint is constructed, the ambient temperature is too high. Excessive temperature will cause wrinkling of the floor paint and affect the gloss of the surface.

6、环氧地坪漆施工现场环境湿度过大(相对湿度80%以上),导致环氧地坪漆漆膜吸收水分后泛白,失去光泽。

6. The environmental humidity of epoxy floor paint construction site is too high (the relative humidity is over 80%), which causes the epoxy floor paint film to become white after absorbing water and lose luster.


避免环氧地坪漆黯淡无光的方法:

Method to avoid dull epoxy floor paint:

1、选择正规地坪漆厂家生产的有质量保证的材料。

1. Choose materials with quality assurance produced by regular floor paint manufacturers.

2、严格按照地坪漆厂家的要求,添加环氧地坪漆配套的稀释剂。

2. In strict accordance with the requirements of flooring paint manufacturers, add diluents for epoxy flooring paint.

3、面漆施工时一定要等待上一涂层完全干透。

3. When topcoat is applied, it must wait for the top coat to be completely dry.

4、环氧地坪漆施工前一定要用地坪研磨机将地面打磨平整,并将油污、杂物等清理干净。

4. Before the construction of epoxy floor paint, the ground must be ground flat by a floor grinder, and the oil and sundries should be cleaned up.

5、环氧地坪漆最佳施工温度是5-25摄氏度,施工时要避开高温时段;

5. The optimum construction temperature of epoxy floor paint is 5-25 degrees Celsius. It is necessary to avoid high temperature during construction.

6、无锡环氧地坪漆施工时环境湿度不能高于80%。

6. The ambient humidity should not be higher than 80% during the construction of epoxy floor paint.


标签:地坪 全部
网友评论

管理员

该内容暂无评论

美国网友
13656181588